Study on the Microsecond Pulse Homogeneous Dielectric Barrier Discharges in Atmospheric Air and Its Influencing Factors

• 作者: Edmund KUFFEL 方志 蔡玲玲 邱毓昌 雷枭
• 来源期刊: 等离子体科学和技术：英文版
• 学科: 工学
• 关键词: 介质阻挡放电 空气间隙 大气压 均匀 影响因素 秒脉冲 脉冲高压电源 放电功率
• 年，卷（期）: 2011,（6）
• 页码范围: 676-681
• 页数: 6页
• 分类号: O461|TM312
• 语种: 英文

摘要

The homogeneous dielectric barrier discharge （DBD） in atmospheric air between two symmetric-columnar copper electrodes with epoxy plates as the dielectric barriers is generated using a us pulse high voltage power supply. The discharge characteristics are studied by measurement of its electrical discharge parameters and observation of its light emission phenom- ena, and the main discharge parameters of the homogenous DBD, such as discharge current and average discharge power, are calculated. Results show that the discharge generated is a homogeneous one with one larger single current pulse of about 2 #s duration appearing in each voltage pulse, and its light emission is radially homogeneous and covers the entire surface of the two elec- trodes. The influences of applied voltage amplitude, air gap distance and barrier thickness on the transition of discharge modes are studied. With the increase of air gap distance, the discharge will transit from homogeneous mode to filamentary mode. The higher the thickness of dielectric barriers, the larger the air gap distance for generating the homogeneous discharge mode. The average discharge power increases non-linearly with increasing applied voltage amplitude, and decreases non-linearly with the increase of air gap distance and barrier thickness. In order to generate stable and homogeneous DBD with high discharge power, thin barriers distance should be used, and higher applied voltage amplitude should be applied to small air gap.