Study of Stress Sources and Critical Stress Combinations for the Input Shaft of a Longitudinally Mounted Four Speed Automotive Automatic Transmission Model

• 作者: N. A. Abdel-Halim
• 来源期刊: 现代机械工程(英文)
• 学科: 医学
• 关键词: ongitudinally Mounted Automotive Automatic Transmission Input SHAFT Stresses TORQUE CONVERTER TORQUE Ratio TORQUE CONVERTER WEIGHT Simple PLANETARY Gear Set WEIGHT
• 年，卷（期）: 2013,（1）
• 页码范围: 44-49
• 页数: 6页
• 分类号: R73

摘要

In the present paper;two models of the input shaft for a Longitudinal Mounted four Speed Automotive Automatic Transmission for the first time were introduced to describe the input shaft critical loads. In the first model;the DC (Direct Clutch) connects two gears together. This gives no change in the set torque (the set output torque equal to the set input torque). In the second model;the ODB (Over Drive Brake) fixes one element of the planetary set. This is resulting, the gear set gives reduction ratio (the set output torque is not equal to the set input torque). So, the transmission input shaft is worked under two different working operating conditions of torque. Also, it is loaded by a two vertical loads which are coming from the turbine and planetary set loads respectively. They are shown that there are three critical combinations of forces (contact force, shear force, and normal force) applied on the input shaft. The critical forces can be possibility exist three types of cracks for the input shaft cross section they are: transverse (torsion stress), longitudinal (bending stress), and vertical (shear stress). The three cracks are studied in this article. The article considers three stress factors: shearing torsion stress, shear stress, and bending stress.