Simulating the Seismic Response of Concentrically Braced Frames Using Physical Theory Brace Models

• 作者: Liang Chen Lucia Tirca
• 来源期刊: 土木工程期刊(英文)
• 学科: 工学
• 关键词: BRACE Model Plastic HINGE Hysteretic Energy SEISMIC Response TIME-HISTORY Analysis
• 年，卷（期）: 2013,（2）
• 页码范围: 69-81
• 页数: 13页
• 分类号: TU3

摘要

The aim of this paper is to assess the accuracy of brace models formulated in Drain 2DX and OpenSees by comparing the simulated results with those obtained from experimental tests. Both, Drain 2DX and OpenSees rely on the physical theory brace model. In this study, experimental tests conducted on the behaviour of structural hollow section braces subjected to symmetric and asymmetric quasi-static cyclic loading were selected for calibrating the numerical model. In addition, the predicted failure strain parameter resulted from a proposed empirical equation as a function of slenderness ratio, width-to-thickness ratio and steel properties was used to define the low-cycle fatigue material that was assigned to model braces in OpenSees. It is concluded that both Drain 2DX and OpenSees brace models give a good prediction in terms of maximum tensile and buckling force, as well as interstorey drift. However, in Drain 2DX, the brace model is not able to replicate the out-of-plan buckling and the braced frame model cannot provide an accurate response when the system experiences highly nonlinear demand. To emphasise the differences in performance between Drain 2DX and OpenSees, the behaviour of a 4-storey concentrically braced frame with zipper bracing configuration, located in Victoria, BC, was investigated.