Evaluation of Cavity Formation and the Use of Cut-off Wall to Reduce the Risk of Washing Subsurface Fine Material

• 作者: Akeel Alharbi Fouzan Alfouzan Muawia A Dafalla
• 来源期刊: 地质学期刊(英文)
• 学科: 医学
• 关键词: COLLAPSE CAVITIES Electrical RESISTIVITY Sarah Formation GEOTECHNICAL Methods
• 年，卷（期）: 2013,（2）
• 页码范围: 71-76
• 页数: 6页
• 分类号: R73

摘要

This study shows the results of mapping numerous cavities and distress which appeared and detected in Qassim area, Saudi Arabia. This phenomenon was observed near a school building and residential area and became a serious risk to occupants and residents. The survey was carried out applying geotechnical techniques which included advancing rotary boreholes to depths of 23 m to 30 m with sampling and testing. The evaluation process also included resistivity imaging profiles using 2D electrical resistivity measurements. Results obtained from this research showed a thick top layer of silty clayey sand soil rich of gypsum and carbonate presenting a hazardous and high-risk soil type. The percentage of fines that are likely to be washed out as a result of chemical disintegration and exposure to significant hydraulic gradient was of great concern. Assessment was made using combined geotechnical and geophysical approach in addition to chemical tests. Based on the data collected and analysis of test results a practical solution was suggested to solve this problem. The use of “cut-off wall” in order to reduce the level of subsurface scour and cajuvity formation were found appropriate. The depth of the cut off wall was determined based on the subsurface geological profile. Advantages of this approach and concerns need to be considered in adopting typical solutions that are presented.