Experimental Study on the Mechanical Properties of FRP Bars by Hybridizing with Steel Wires

• 作者: Dong-Woo Seo Ji-Hyun Hwang Ki-Tae Park Young-Jun You
• 来源期刊: 工程(英文)(1947-3931)
• 学科: 医学
• 关键词: Fiber-Reinforced POLYMER (FRP) FRP Hybrid BAR TENSILE Test Steel Wire
• 年，卷（期）: gc-eng_2014,（7）
• 页码范围: 365-373
• 页数: 9页
• 分类号: R73

摘要

Many studies on fiber reinforced polymer composite bars, as a substitute for reinforcing bars, have been conducted to solve corrosion of steel in reinforced concrete structures since 1960s’. However, FRP Bars have a lower elastic modulus than steel rebar as a structural component of concrete structures. Material properties with brittleness fracture and low elastic modulus can be improved by combining cheaper steel than carbon or aramid fibers. In this study, prototypes of FRP Bars with inserted steel wires (i.e., “FRP Hybrid Bars”) were developed and their tensile performance was compared depending on the proportion and diameter of steel. The FRP Hybrid Bars were made by dividing them into D13 and D16 according to the diameter and proportion of inserted wires: GFRPs were combined with wires having different diameters of 0.5 mm, 1.0 mm, and 2.0 mm in the proportion of 10%, 30%, 50%, and 70%, respectively. As a result of tensile tests, the elastic modulus of FRP Hybrid Bars were improved as 20% - 190% in comparison with the fully GFRP Bars.