基本信息来源于合作网站,原文需代理用户跳转至来源网站获取       
摘要:
Following the previous relevant works [1]-[3], a scaling analysis is performed to derive a set of scaling criteria which were thought to be suitable for reproducing the major thermal-hydraulic phenomena in a scaled-down CANDU moderator tank similar to that in a prototype power plant during a full power steady state condition. The objective of building a scaled-down moderator tank is to generate the experimental data necessary to validate the computer codes which are used to analyze the accident analysis of CANDU-6 plants. The major variables of interests in this paper are moderator flow velocity and temperature of the moderator which is D2O inside the moderator tank during a steady state and transient conditions. The reason is that the local subcooling of the moderator is found to be a critical parameter determining whether the stable film boiling can sustain on the outer surface of the calandria tube if the contact of overheated pressure tube and cold calandria tube should occur due to pressure tube ballooning during LBLOCA with ECC injection failure [4]. The key phenomena involved include the inlet jet development and impingement, buoyancy force driven by the moderator temperature gradient caused by non-uniform direct heating of the moderator, and the pressure drop due to viscous friction of the flow across the calandria tube array. In this paper, the previous researches are reviewed, some concerns or potential problems associated with them implied by comparing CFD analyses results between the CANDU-6 moderator tank and 1/4 scaled-down test facility are described, and as a way to examine the assumption of the scaling analysis is true an order-of-magnitude analyses are performed. Based on the results of these analyses the assumption of neglecting ?and ?terms cannot be justified for the power of 0.5 MW and 1.566 MW for the 1/4 scaled-down facility. Further investigation is thought to be necessary to confirm this result, i.e. if the scaling of the previous work1 is justifiable by some other independent analyses.
推荐文章
CANDU-6型反应堆中引入稍加浓铀的研究
稍加浓铀
CANDU-6堆
燃料循环
天然铀
CANDU-6型核燃料元件制造钎焊一次焊合率的控制
CANDU-6型核燃料元件
钎焊一次焊合率
控制
重水堆CANDU-6机组失去两路外电源的影响及对策
外电源
失电影响
安全挑战
干预原则
内容分析
关键词云
关键词热度
相关文献总数  
(/次)
(/年)
文献信息
篇名 A Review of the Scaling Study of the CANDU-6 Moderator Circulation Test Facility
来源期刊 电力能源(英文) 学科 医学
关键词 CANDU-6 THERMAL-HYDRAULIC Phenomena MODERATOR Tank Experimental Test FACILITY SCALING Analysis
年,卷(期) 2014,(9) 所属期刊栏目
研究方向 页码范围 64-73
页数 10页 分类号 R73
字数 语种
DOI
五维指标
传播情况
(/次)
(/年)
引文网络
引文网络
二级参考文献  (0)
共引文献  (0)
参考文献  (0)
节点文献
引证文献  (0)
同被引文献  (0)
二级引证文献  (0)
2014(0)
  • 参考文献(0)
  • 二级参考文献(0)
  • 引证文献(0)
  • 二级引证文献(0)
研究主题发展历程
节点文献
CANDU-6
THERMAL-HYDRAULIC
Phenomena
MODERATOR
Tank
Experimental
Test
FACILITY
SCALING
Analysis
研究起点
研究来源
研究分支
研究去脉
引文网络交叉学科
相关学者/机构
期刊影响力
电力能源(英文)
月刊
2327-588X
武汉市江夏区汤逊湖北路38号光谷总部空间
出版文献量(篇)
568
总下载数(次)
0
总被引数(次)
0
论文1v1指导