Dependence of corrosion resistance on grain boundary characteristics in a high nitrogen CrMn austenitic stainless steel

• 来源期刊: 材料科学技术（英文版）
• 年，卷（期）: 2017,（12）
• 页码范围: 1621-1628
• 页数: 8页
• 语种: 英文

摘要

Processing schedules for grain boundary engineering involving different types of cold deformation (tension,compression,and rolling) and annealing were designed and carried out for 18Mn18Cr0.6N high nitrogen austenitic stainless steel.The grain boundary characteristic distribution was obtained and characterized by electron backscatter diffraction (EBSD) analysis.The corrosion resistance of the specimens with different grain boundary characteristic distribution was examined by using potentiodynamic polarization test.The corrosion behavior of different types of boundaries after sensitization was also studied.The fraction of low-Σ boundaries decreased with increasing strain,and it was insensitive to the type of cold deformation when the engineering strain was lower than 20％.At the strain of 30％,the largest and smallest fractions of low-Σ boundaries were achieved in cold-tensioned and rolled specimens,respectively.The fraction of low-Σ boundaries increased exponentially with the increase of grain size.The proportion of low-angle grain boundaries increased with decreasing grain size.Increasing the fraction of low-Σ boundaries could improve the pitting corrosion resistance for the steels with the same grain size.After sensitization,the relative corrosion resistances of low-angle grain boundaries,Σ3 boundaries,and Σ9 boundaries were 100％,95％,and 25％,respectively,while Σ27 boundaries,other low-Σ boundaries and random high-angle grain boundaries had no resistance to corrosion.