Distributed Weak Fiber Bragg Grating Vibration Sensing System Based on 3 × 3 Fiber Coupler

• 来源期刊: 光子传感器（英文版）
• 关键词: 3 × 3 fiber coupler distributed fiber Bragg grating vibration sensing system demodulation method research
• 年，卷（期）: 2018,（2）
• 页码范围: 146-156
• 页数: 11页
• 语种: 英文
• DOI: 10.1007/s13320-018-0410-3

摘要

A novel distributed weak fiber Bragg gratings (FBGs) vibration sensing system has been designed to overcome the disadvantages of the conventional methods for optical fiber sensing networking,which are:low signal intensity in the usually adopted time-division multiplexing (TDM)technology,insufficient quantity of multiplexed FBGs in the wavelength-division multiplexing (WDM) technology,and that the mixed WDM/TDM technology measures only the physical parameters of the FBG locations but cannot perform distributed measurement over the whole optical fiber.This novel system determines vibration events in the optical fiber line according to the intensity variation of the interference signals between the adjacent weak FBG reflected signals and locates the vibration points accurately using the TDM technology.It has been proven by tests that this system performs vibration signal detection and demodulation in a way more convenient than the conventional methods for the optical fiber sensing system.It also measures over the whole optical fiber,therefore,distributed measurement is fulfilled,and the system locating accuracy is up to 20 m,capable of detecting any signals of whose drive signals lower limit voltage is 0.2 V while the frequency range is 3 Hz-1000Hz.The system has the great practical significance and application value for perimeter surveillance systems.