Design of a hyper-numerical-aperture deep ultraviolet lithography objective with freeform surfaces

• 来源期刊: 中国光学快报（英文版）
• 年，卷（期）: 2018,（3）
• 页码范围: 16-20
• 页数: 5页
• 语种: 英文
• DOI: 10.3788/COL201816.030801

摘要

We have proposed and developed a design method of a freeform surfaces (FFSs) based hyper-numerical-aperture deep ultraviolet (DUV) projection objective (PO) with low aberration.With an aspheric initial configuration,lens-form parameters were used to determine the best position to remove elements and insert FFSs.The designed FFSs PO reduced two elements without increasing the total thickness of the glass materials.Compared with aspheric initial configuration,the wavefront error of the FFSs PO decreased from 0.006λ to 0.005λ,the distortion reduced from 1 to 0.5 nm,and the aspheric departure decreased from 1.7 to 1.35 mm.The results show that the design method of the FFSs PO is efficient and has improved the imaging performance of PO.The design method of FFSs PO provides potential solutions for DUV lithography with low aberrations at 10-5 nm nodes.