作者:
基本信息来源于合作网站,原文需代理用户跳转至来源网站获取       
摘要:
High temperature applications such as turbine blades for aeronautics or molten glass-shaping tools require the use of refractory metallic materials.Among the later ones,cast superalloys based on some transition metals and reinforced by MC carbides stay in good place and their metallurgy merits to be well known.This work consists in a general exploration of the as-cast microstructures which can be obtained after solidification and solid state cooling down to ambient temperature for a wide series of alloys for which the base element and the MC-former element both vary.For fixed contents in chromium and carbon contents,the compositions of a total of nineteen alloys were considered.These alloys are based on Ni,Co,Fe or Nb and the M content was each time chosen to favor the appearance of TiC,TaC,NbC,HfC or ZrC,as single carbide in a given alloy.After elaboration,metallographic samples were observed by electron microscopy to investigate the obtained microstructures.The obtained results show first that the MC carbides were in many cases successfully obtained at the expense of other possible carbides(for all Co-based alloys for example)but there are also several exceptions(notably for some Nibased alloys).Second,the obtained monocarbides have a eutectic origin and they are script-liked shaped.However they are here too some exceptions,as the rare HfC obtained in a Nb-base).In general,the results obtained in this work show that the principle of dendritic matrix combined with MC carbides with a script-like morphology is not necessarily obtained:the nature of the{base element,MC-former element}combination governs the microstructure of the alloy in its as-cast state for these particular compositions in chromium and carbon.In some cases other carbides may appear and the microstructures may be even of another type.
推荐文章
基于Matlab的M/M/m排队模型的仿真
事件调度法
M/M/m模型
Matlab语言
仿真
M2M大型装备远程监控
M2M
远程
实时监控
随机服务系统理论M/M/C和M/G/K模型的实例应用
M/M/C模型
病床比例
M/G/K模型
泊松分布
M/M/n模型的高负荷极限及仿真
多服务台队列
泊松到达
指数服务
高负荷极限
内容分析
关键词云
关键词热度
相关文献总数  
(/次)
(/年)
文献信息
篇名 Influence of the M and M’Metals on the Carbides Population in As-Cast M’-based Alloys Designed to be MC-Strengthened
来源期刊 金属材料研究(英文) 学科 工学
关键词 Cast REFRACTORY ALLOYS MC carbides AS-CAST microstructures Base element monocarbides-former elements
年,卷(期) 2019,(1) 所属期刊栏目
研究方向 页码范围 10-18
页数 9页 分类号 TG1
字数 语种
DOI
五维指标
传播情况
(/次)
(/年)
引文网络
引文网络
二级参考文献  (0)
共引文献  (0)
参考文献  (0)
节点文献
引证文献  (0)
同被引文献  (0)
二级引证文献  (0)
2019(0)
  • 参考文献(0)
  • 二级参考文献(0)
  • 引证文献(0)
  • 二级引证文献(0)
研究主题发展历程
节点文献
Cast
REFRACTORY
ALLOYS
MC
carbides
AS-CAST
microstructures
Base
element
monocarbides-former
elements
研究起点
研究来源
研究分支
研究去脉
引文网络交叉学科
相关学者/机构
期刊影响力
金属材料研究(英文)
半年刊
2630-5135
12 Eu Tong Sen Stree
出版文献量(篇)
20
总下载数(次)
0
总被引数(次)
0
论文1v1指导