Improvement of Interlaminar Fracture Properties of Out of Autoclave Manufactured Carbon Fiber Reinforced Polymers Using Multi-Walled Carbon Nanotubes

• 作者: Dimoka Polyxeni Kostagiannakopoulou Christina Kostopoulos Vassilis Masouras Athanasios
• 来源期刊: 力学国际期刊(英文)
• 学科: 工学
• 关键词: Multi-Walled Carbon Nanotubes (MWCNTs) INTERLAMINAR Fracture TOUGHNESS Multi-Scale Composites (CFRPs) OUT of AUTOCLAVE (OoA)
• 年，卷（期）: 2019,（6）
• 页码范围: 147-162
• 页数: 16页
• 分类号: TB3

摘要

The present study aims to the development of Out of Autoclave (OoA) Carbon Fiber Reinforced Polymers (CFRPs) with increased interlaminar fracture toughness by using MWCNTs. The introduction of MWCNTs into the structure of CFRPs has been succeeded by using carbon nanotube-enriched sizing agent for the pretreatment of the fiber preform using an in-house developed methodology that can be easily scaled up. The positive effect of the proposed methodology on the interlaminar fracture toughness of the CFRP laminate was assessed by the increase of Mode I and Mode II interlaminar fracture toughness of the composites. Different wt% MWCNTs concentrations were used (namely 0.5%, 1%, 1.5% and 2.5%). It was found that the nanomodified composites exhibit a significant increase of the interlaminar critical strain energy release rate GIC and GIIC of the order of 103% and 62% respectively, in the case of 1.5 wt% MWCNTs weight content. Scanning Electron Microscopy (SEM) of the fracture surfaces of CFRP samples revealed the contribution and the associated synergistic mechanisms of MWCNTs to the increase of the crack propagation resistance in the case of nano-modified CFRPs compared to the reference material.