Synthetic Effect of Cr and Mo Elements on Microstructure and Properties of Laser Cladding NiCrxMoy Alloy Coatings

• 来源期刊: 金属学报（英文版）
• 年，卷（期）: 2020,（10）
• 页码范围: 1331-1345
• 页数: 15页
• 语种: 英文

摘要

NiCrxMoy (x =1,1.5;y =0,0.1,0.3) alloy coatings were prepared on the Q235 substrate by laser cladding under the protection of argon.The phase composition,microstructure,corrosion behavior,and mechanical properties of the NiCrxMoy alloy coatings were investigated using X-ray diffraction,scanning electron microscopy,transmission electron microscopy,electrochemical tests,X-ray photoelectron spectroscopy,microhardness,and nanoindentation tests.As the Cr content increased,the phase composition of the coatings changed from a single face-centered cubic (FCC) structure to a dual-phase structure coexisting with body-centered cubic (BCC) and FCC structures,while the addition of Mo promoted the precipitation of σ phase.The appearance of a homogeneous dual-phase structure and some amount of σ phase played a positive role in the corrosion resistance of NiCrxMoy coatings.Cr3+ ions and Mo6+ ions in the passive film enhanced the stability of the coatings.The nanoindentation tests showed that the nanohardness (6.71 GPa) and elastic modulus (184.40 GPa) of BCC phase were higher than those of the FCC phase (5.19 GPa and 155.26 GPa,respectively).Overall,the BCC phase and σ phase improved the mechanical properties of the coatings.