Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading

• 作者: Yu Zhou Qunbo Fan Xin Liu Duoduo Wang Xinjie Zhu Kai Chen
• 来源期刊: 材料科学技术（英文版）
• 年，卷（期）: 2020,（24）
• 页码范围: 138-148
• 页数: 11页
• 语种: 英文

摘要

A dynamic compression test was performed on α +[β dual-phase titanium alloy Ti20C using a split Hopkin-son pressure bar.The formation of adiabatic shear bands generated during the compression process was studied by combining the proposed multi-scale crystal plasticity finite element method with experimen-tal measurements.The complex local micro region load was progressively extracted from the simulation results of a macro model and applied to an established three-dimensional multi-grain microstructure model.Subsequently,the evolution histories of the grain shape,size,and orientation inside the adiabatic shear band were quantitatively simulated.The results corresponded closely to the experimental results obtained via transmission electron microscopy and precession electron diffraction.Furthermore,by cal-culating the grain rotation and temperature rise inside the adiabatic shear band,the microstructural softening and thermal softening effects of typical heavily-deformed α grains were successfully decou-pled.The results revealed that the microstructural softening stress was triggered and then stabilized (in general) at a relatively high value.This indicated that the mechanical strength was lowered mainly by the grain orientation evolution or dynamic recrystallization occurring during early plastic deformation.Subsequently,thermal softening increased linearly and became the main softening mechanism.Notice-ably,in the final stage,the thermal softening stress accounted for 78.4 ％ of the total softening stress due to the sharp temperature increase,which inevitably leads to the stress collapse and potential failure of the alloy.