基本信息来源于合作网站,原文需代理用户跳转至来源网站获取       
摘要:
Y2O3:Yb3+ 5 at% ceramics have been synthesized by the reactive sintering method using different commercial yttria powders (Alfa-Micro, Alfa-Nano, and ITO-V) as raw materials. It has been shown that all Y2O3 starting powders consist from agglomerates up to 5–7 μm in size which are formed from 25–60 nm primary particles. High-energy ball milling allows to significantly decreasing the median particle size D50 below 500 nm regardless of the commercial powders used. Sintering experiments indicate that powder mixtures fabricated from Alfa-Nano yttria powders have the highest sintering activity, while (Y0.86La0.09Yb0.05)2O3 ceramics sintered at 1750 ℃ for 10 h are characterized by the highest transmittance of about 45%. Y2O3:Yb3+ ceramics have been obtained by the reactive sintering at 1750–1825 ℃ using Alfa-Nano Y2O3 powders and La2O3+ZrO2 as a complex sintering aid. The effects of the sintering temperature on densification processes, microstructure, and optical properties of Y2O3:Yb3+ 5 at% ceramics have been studied. It has been shown that Zr4+ ions decrease the grain growth of Y2O3:Yb3+ ceramics for sintering temperatures 1750–1775 ℃. Further increasing the sintering temperature was accompanied by a sharp increase of the average grain size of ceramics referred to changes of structure and chemical composition of grain boundaries, as well as their mobility. It has been determined that the optimal sintering temperature to produce high-dense yttria ceramics with transmittance of 79%–83% and average grain size of 8 μm is 1800 ℃. Finally, laser emission at ~1030.7 nm with a slope efficiency of 10% was obtained with the most transparent Y2O3:Yb3+ 5 аt% ceramics sintered.
推荐文章
Y2O3/La2O3/Al2O3/Cu复合材料的制备与性能
喷射沉积
内氧化
Y2O3/La2O2O3/Al2O3/Cu复合材料
显微组织
性能
纳米Y2O3∶Eu3+发光材料的研究综述
纳米
Y2O3∶Eu3+
发光材料
燃烧合成AlN/ Y2O3陶瓷及致密化机理分析
AlN陶瓷
燃烧合成
Y2O3
致密化
SHS-HIP
内容分析
关键词云
关键词热度
相关文献总数  
(/次)
(/年)
文献信息
篇名 Effect of starting materials and sintering temperature onmicrostructure and optical properties of Y2O3:Yb3+5 at% transparent ceramics
来源期刊 先进陶瓷(英文版) 学科
关键词
年,卷(期) 2021,(1) 所属期刊栏目 Research Article
研究方向 页码范围 49-61
页数 13页 分类号
字数 语种 英文
DOI
五维指标
传播情况
(/次)
(/年)
引文网络
引文网络
二级参考文献  (19)
共引文献  (2)
参考文献  (31)
节点文献
引证文献  (0)
同被引文献  (0)
二级引证文献  (0)
1993(1)
  • 参考文献(0)
  • 二级参考文献(1)
1996(2)
  • 参考文献(1)
  • 二级参考文献(1)
1998(1)
  • 参考文献(0)
  • 二级参考文献(1)
1999(1)
  • 参考文献(0)
  • 二级参考文献(1)
2000(1)
  • 参考文献(0)
  • 二级参考文献(1)
2003(2)
  • 参考文献(2)
  • 二级参考文献(0)
2004(2)
  • 参考文献(1)
  • 二级参考文献(1)
2007(1)
  • 参考文献(0)
  • 二级参考文献(1)
2008(1)
  • 参考文献(0)
  • 二级参考文献(1)
2009(4)
  • 参考文献(0)
  • 二级参考文献(4)
2010(1)
  • 参考文献(1)
  • 二级参考文献(0)
2011(4)
  • 参考文献(1)
  • 二级参考文献(3)
2012(4)
  • 参考文献(2)
  • 二级参考文献(2)
2013(7)
  • 参考文献(5)
  • 二级参考文献(2)
2014(3)
  • 参考文献(3)
  • 二级参考文献(0)
2015(3)
  • 参考文献(3)
  • 二级参考文献(0)
2016(1)
  • 参考文献(1)
  • 二级参考文献(0)
2017(5)
  • 参考文献(5)
  • 二级参考文献(0)
2018(2)
  • 参考文献(2)
  • 二级参考文献(0)
2019(4)
  • 参考文献(4)
  • 二级参考文献(0)
2021(0)
  • 参考文献(0)
  • 二级参考文献(0)
  • 引证文献(0)
  • 二级引证文献(0)
引文网络交叉学科
相关学者/机构
期刊影响力
先进陶瓷(英文版)
季刊
2226-4108
10-1154/TQ
eng
出版文献量(篇)
290
总下载数(次)
0
论文1v1指导