Towards understanding the microstructure and temperature rule in large strain extrusion machining

• 作者: Yun-Yun Pi Wen-Jun Deng Jia-Yang Zhang Xiao-Long Yin Wei Xia
• 来源期刊: 先进制造进展（英文版）
• 年，卷（期）: 2021,（2）
• 页码范围: 262-272
• 页数: 11页
• 语种: 英文

摘要

Large strain extrusion machining (LSEM) is a typical process for preparing ultrafine or nanocrystalline strips.It is based on large plastic deformation.The pro-cessing parameters of LSEM in this study were optimized by experiments and simulations.Using the orthogonal array,signal-to-noise ratio,and analysis of variance,the influence and contribution of processing parameters on response variables were analyzed.Because of the differ-ence in processing parameters between optimizing the average grain size and the maximum temperature,the response variables analyzed must be correctly selected.Furthermore,the optimal processing parameters for obtaining the minimum average grain size and the lowest maximum temperature are analyzed.The results show that the tool rake angle is the most important factor.However,the level of this factor required to achieve the minimum average grain size is different from that required to obtain the lowest maximum temperature.The validity of the method is verified through experiments and simulations.