Self-Adaptive Control System for Additive Manufacturing Using Double Electrode Micro Plasma Arc Welding

• 作者: Nan Li Ding Fan Jiankang Huang Shurong Yu Wen Yuan Miaomiao Han
• 来源期刊: 中国机械工程学报
• 年，卷（期）: 2021,（3）
• 所属期刊栏目: Intelligent Manufacturing Technology
• 页码范围: 285-298
• 页数: 14页
• 语种: 英文

摘要

Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the con-trol system's performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part's layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.