Tribological properties of multilayer tetrahedral amorphous carbon coatings deposited by filtered cathodic vacuum arc deposition

• 作者: Young-Jun JANG Jae-Il KIM WooYoung LEE Jongkuk KIM
• 来源期刊: 摩擦（英文版）
• 年，卷（期）: 2021,（5）
• 所属期刊栏目: Research Articles
• 页码范围: 1292-1302
• 页数: 11页
• 语种: 英文

摘要

Tetrahedral amorphous carbon (ta-C) has emerged as an excellent coating material for improving the reliability of application components under high normal loads. Herein, we present the results of our investigations regarding the mechanical and tribological properties of a 2-μm-thick multilayer ta-C coating on high-speed steel substrates. Multilayers composed of alternating soft and hard layers are fabricated using filtered a cathodic vacuum arc with alternating substrate bias voltages (0 and 100 V or 0 and 150 V). The thickness ratio is discovered to be 1:3 for the sp2-rich and sp3-rich layers. The results show that the hardness and elastic modulus of the multilayer ta-C coatings increase with the sp3 content of the hard layer. The hardness reached approximately 37 GPa, whereas an improved toughness and a higher adhesion strength (> 29 N) are obtained. The friction performance (μ = 0.07) of the multilayer coating is similar to that of the single layer ta-C thick coating, but the wear rate (0.13 × 10–6 mm3/(N·m)) improved under a high load of 30 N. We further demonstrate the importance of the multilayer structure in suppressing crack propagation and increasing the resistance to plastic deformation (H3/E2) ratio.