基本信息来源于合作网站,原文需代理用户跳转至来源网站获取       
摘要:
Temperature difference control (TDC) schemes can clearly suppress the adverse influence of pressure variations on product quality control of various distillation columns (DCs) by employing temperature differences (TDs) between the sensitive stage temperature (Ts) and reference stage temperature (TR),i.e.,TS-TR,to infer the controlled product qualities.However,because the TDC scheme has failed to specially take the corresponding relationship between the TD employed in each control loop and the controlled product quality into account,it may suffer from relatively large steady-state errors in the controlled product qualities.To address this problem,an enhanced TDC (ETDC) scheme is proposed in the current article,in which an enhanced TD (ETD),i.e.,Ts-α × TR,is employed to replace the conventional TD for each control loop.While the locations of the sensitive and reference stages of the ETD are respectively determined according to sensitivity analysis and SVD analysis,the adjusted coefficient α is set to be the ratio between the averaged absolute variation magnitudes (AAVMs) of the Ts and TR so that the relationship between the Ts and TR can be appropriately coordinated.With reference to the operations of three different distillation systems,i.e.,one conventional DC distilling an ethanol (E)/butanol (B) binary mixture,one conventional DC distilling an E/propanol (P)/B ternary mixture,and one dividing-wall distillation column distilling an E/P/B ternary mixture,the performance of the ETDC scheme is assessed by compared with the conventional TDC scheme and the double TD control (DTDC) scheme.The dynamic simulation results show that the ETDC scheme is better than the conventional TDC scheme with reduced steady-state errors in the controlled product qualities and improved dynamic responses,and is comparable with the DTDC scheme despite the less temperature measurements are employed.
推荐文章
内容分析
关键词云
关键词热度
相关文献总数  
(/次)
(/年)
文献信息
篇名 Enhanced temperature difference control of distillation columns based on the averaged absolute variation magnitude
来源期刊 中国化学工程学报(英文版) 学科
关键词
年,卷(期) 2021,(1) 所属期刊栏目 Process Systems Engineering and Process Safety
研究方向 页码范围 266-278
页数 13页 分类号
字数 语种 英文
DOI
五维指标
传播情况
(/次)
(/年)
引文网络
引文网络
二级参考文献  (12)
共引文献  (0)
参考文献  (15)
节点文献
引证文献  (0)
同被引文献  (0)
二级引证文献  (0)
1984(1)
  • 参考文献(1)
  • 二级参考文献(0)
2000(1)
  • 参考文献(0)
  • 二级参考文献(1)
2005(1)
  • 参考文献(0)
  • 二级参考文献(1)
2006(2)
  • 参考文献(1)
  • 二级参考文献(1)
2007(3)
  • 参考文献(1)
  • 二级参考文献(2)
2010(1)
  • 参考文献(1)
  • 二级参考文献(0)
2012(1)
  • 参考文献(1)
  • 二级参考文献(0)
2013(1)
  • 参考文献(1)
  • 二级参考文献(0)
2014(1)
  • 参考文献(0)
  • 二级参考文献(1)
2016(1)
  • 参考文献(0)
  • 二级参考文献(1)
2017(5)
  • 参考文献(2)
  • 二级参考文献(3)
2018(3)
  • 参考文献(1)
  • 二级参考文献(2)
2019(6)
  • 参考文献(6)
  • 二级参考文献(0)
2021(0)
  • 参考文献(0)
  • 二级参考文献(0)
  • 引证文献(0)
  • 二级引证文献(0)
引文网络交叉学科
相关学者/机构
期刊影响力
中国化学工程学报(英文版)
月刊
1004-9541
11-3270/TQ
大16开
北京东城区青年湖南街13号
80-448
1982
eng
出版文献量(篇)
4237
总下载数(次)
1
  • 期刊分类
  • 期刊(年)
  • 期刊(期)
  • 期刊推荐
论文1v1指导