Fabrication of (TiB/Ti)-TiAl composites with a controlled laminated architecture and enhanced mechanical properties

• 作者: Hao Ding Xiping Cui Naonao Gao Yuan Sun Yuanyuan Zhang Lujun Huang Lin Geng
• 来源期刊: 材料科学技术（英文版）
• 年，卷（期）: 2021,（3）
• 页码范围: 221-233
• 页数: 13页
• 语种: 英文

摘要

The (TiB/Ti)-TiAl composites with a laminated structure composing of alternating TiB/Ti composite layers,α2-Ti3Al interfacial reaction layers of and γ-TiAl layers were successfully prepared by spark plasma sintering of alternately stacked TiB2/Ti powder layers and TiAl powder layers.And the influence of thickness ratio of TiB2/Ti powder layers to TiAl powder layers on microstructure evolution and mechanical properties of the resulting (TiB/Ti)-TiAl laminated composites were investigated systemically.The results showed that the thickening of α2-Ti3Al layers which originated from the reaction of Ti and TiAl was significantly hindered by introducing TiB2 particles into starting Ti powders.As the thickness ratio of TiB2/Ti powder layers to TiAl powder layers increased,the bending fracture strength and fracture toughness at room temperature of the final (TiB/Ti)-TiAl laminated composites were remarkably improved,especially for the (TiB/Ti)-TiAl composites prepared by TiB2/Ti powder layers with thickness of 800 μm and TiAl powder layers with thickness of 400 μm,whose fracture toughness and bending strength were up to 51.2 MPa·m1/2 and 1456 MPa,respectively,293 ％ and 108 ％ higher than that of the monolithic TiAl alloys in the present work.This was attributed to the addition of high-performance network TiB/Ti composite layers.Moreover,it was noteworthy that the ultimate tensile strength at 700 ℃ of (TiB/Ti)-TiAl composites fabricated by 400 μm thick TiB2/Ti powder layers and 400 μm thick TiAl powder layers was as high as that at 550 ℃ of network TiB/Ti composites.This means the service temperature of (TiB/Ti)-TiAl laminated composites was likely raised by 150 ℃,meanwhile a good combination of high strength and high toughness at ambient temperature could be maintained.Finally,the fracture mechanism of (TiB/Ti)-TiAl laminated composites was proposed.