Design of Bump Magnet of CSR

• 来源期刊: 中国科学院近代物理研究所和兰州重离子研究装置年报：英文版
• 学科: 物理学
• 年，卷（期）: 2001,（1）
• 页码范围: 122-122
• 页数: 1页
• 分类号: O44

摘要

Four bumpers are required for the injection and extraction of CSR. The parameters of the bumpers are shown in table 1. Because of the steep raising and falling time and therefore the inductance of the magnet should be as small as possible, so the material of the magnet cores must be ferrite. And in order to reduce the cost of the bump magnet, the cross-section of the four ferrite cores was designed as the same, as shown in Fig.1.It is very similar to the lamination of the H-type dipole. And Fig.2 is the...