Surface and Bulk Defects in Cr-Mn Iron Alloy Cast in Metal and Sand Moulds: Characterization by Positron Annihilation Techniques

• 作者: Chikkakuntappa Ranganathaiah Debashish Dutta Jaya Madhu Raj Parthasarathy Sampathkumaran Pradeep Kumar Pujari Priya Maheshwari S. Kishore Subramanyam Seetharamu
• 来源期刊: 表面工程材料与先进技术期刊(英文)
• 学科: 医学
• 关键词: CR-MN CAST Iron Heat Treatment POSITRON LIFETIME Spectroscopy SLOW POSITRON Beam Analysis
• 年，卷（期）: bmgcclyxjjsqkyw_2011,（3）
• 页码范围: 136-143
• 页数: 8页
• 分类号: R73

摘要

High chromium (Cr: 16% - 19%) iron alloy with 5% and 10% manganese (Mn) fabricated in metal and sand moulds by induction melting technique were investigated for defects microstructure both in the as-cast and heat treated conditions. Non-destructive techniques namely Positron Lifetime Spectroscopy and slow positron Doppler Broadening studies were employed to characterize the defects in the bulk as well as surface of the alloy and their influence of metallurgical parameters. The Positron Lifetime Spectroscopy data reveals that the defect concentration is higher for sand mould alloy samples compared to metal mould ones. The reasons for fewer defects in metal mould are attributed to faster heat transfer in the metal mould. Further, heat treatment yielded spherodization of carbides in the matrix resulting in reduced defects concentration. The S-parameter profiles from Doppler Broadening studies suggest defect concentration at the surface is less in 5% Manganese and near absence of any modification of defect structure following heat treatment in 10% Manganese sample closer to surface.