Effects of Anthropometry Variations on Physiological Parameters of Heart Rate, Oxygen Consumption, Aerobic Power While Performing Manual Operation at Fixed Vice Height

• 作者: Bukola Olanrewaju Afolabi Olusegun Gideon Akanbi Omowumi Adegboye
• 来源期刊: 工程(英文)(1947-3931)
• 学科: 工学
• 关键词: ANTHROPOMETRY Variation Cutting Operation Fixed VICE HEIGHT PHYSIOLOGICAL Parameters Wear Rate
• 年，卷（期）: 2020,（1）
• 页码范围: 47-57
• 页数: 11页
• 分类号: TG1

摘要

This study investigated the effect of fixed height standing-workstation on different people with diverse anthropometry dimensions. Measurements of some anthropometric and physiological parameters are carried out as bases for the calculation of body mass index (BMI) and the determination of the maximum heart rate (HRmax) and aerobic power (VO2max) of individual subject while performing manual cutting operation with hacksaw on fixed vice height of 940 mm. Twenty subjects (S1 to S20) parted 2 mm thick square-pipe of 25 mm × 25 mm. Each subject carried out cutting operation in 5 replicates and their physiological parameters during activities are measured to determine their expended energy (EE) and oxygen consumption rate (VO2). The results showed that subject S4 with BMI of 20.76 kg/m2 has maximum cutting rate of 5.33 stroke/s, while subject S8 with BMI of 23.39 kg/m2 has minimum cutting rate of 0.92 stroke/s. There was a statistically significant effect on the interaction between BMI, EE and Cutting rate, with F = 827.54, P = 0.000, R2 = 0.967 and S = 1.749 units. Subject S11 was discovered to have VO2 (28.54 l/min) and VO2max (24.36 ml/min/kg), with highest value of EE (2.94 kcal/min). Wear rates of 1.86 teeth/s and 9.55 teeth/s have the same energy cost (EE = 0.87 kcal/min) but different cutting time of 36.65 s (S18) and 10.89 s (S20) respectively. This could explain in-part that excess 25.76 s utilized in operation time by subject S18 is responsible for keeping approximately 7.7 teeth intact as regards tool management. EE and Tool Wear Rate in one-way analysis of variance, were statistically significant (F = 45.87, P = 0.000, R2 = 54.69% and S = 1.617 units) at 0.05 level.