Design Analysis of Bevel Gear for Gearmotor Selection in Revolving Platform

• 作者: Nurudeen A. Raji Kasali A. Adedeji Elkanah O. Oyetunji Ayodeji D. Agbelusi
• 来源期刊: 现代机械工程(英文)
• 学科: 工学
• 关键词: ROSTRUM Bevel Gear GEARBOX SPLINE SHAFT TORQUE KEY Mechanism
• 年，卷（期）: 2021,（1）
• 页码范围: 1-11
• 页数: 11页
• 分类号: TG3

摘要

<span style="font-family:Verdana;">The design of bevel gear for use in the development of revolving rostrum is presented. The pinion gear is designed to rotate at 1400 rpm for the output gear of 23 rpm. A suitable gearmotor was selected for the design based on the bevel gear design analysis. The motion is transmitted to the rostrum via a shaft keyed to it with a gib-head key and assembled on the rostrum with a spline connector. The analysis of the bevel mesh shows that maximum deformation of about 26.552 mm occurs in the pinion due to the loading the pinion tooth. The deformation of the tooth is observed to affect considerable the performance of the system. The transmission efficiency of the mechanism </span><span style="font-family:Verdana;">was obtained as 86% though effective for the operation of the system but</span> <span style="font-family:Verdana;">could be improved by a more careful material selection for the bevel gear</span><span style="font-family:Verdana;"> mesh.</span>