Synergistic modification of the tribological properties of polytetrafluoroethylene with polyimide and boron nitride

• 作者: Chaojie XIE Kejian WANG
• 来源期刊: 摩擦（英文版）
• 年，卷（期）: 2021,（6）
• 所属期刊栏目: Research Articles
• 页码范围: 1474-1491
• 页数: 18页
• 语种: 英文

摘要

Polytetrafluoroethylene (PTFE) blended with polyimide (PI) and filled with boron nitride (BN) is prepared through cold pressing and sintering for composites with remarkable wear resistance and reduced coefficient of friction (COF). The characterizations show that BN and PI at different levels, improve the hardness, dynamic thermo-mechanical modulus, thermal conductivity, and tribological properties of PTFE. PI boosts the dispersion and bonding of BN in PTFE. In dry sliding friction of a block-on-ring tribometer, the wear rate and COF of 10:10:80 BN/PI/PTFE reduce to almost 1/300 and 80％ of those of pure PTFE, respectively, as the wear mechanism transition from being adhesive to partially abrasive. This occurs only when the additives BN and PI induce a synergistic effect, that is, at concentrations that are not higher than ca. 10 wt％ and 15 wt％, respectively. The obvious agglomeration at high percentages of added PI and severe conditions (400 N and 400 rpm) induce strong adhesive failure. The variations in the tensile properties, hardness, crystallization, and microstructure of the composites correspond to different effects. The multiple parameters of the plots of wear and friction are transformed into their contour curves. The mechanism transition maps aid in understanding the influence of various test conditions and composite compositions on the contact surfaces in the space-time framework of wear.