Formation Mechanism of Nanoparticles in Fe-Cr-Al ODS Alloy Fabricated by Direct Oxidation Method

• 作者: Fuzhao Yan Jing Li Yiyi Li Liangyin Xiong Shi Liu
• 来源期刊: 金属学报（英文版）
• 年，卷（期）: 2021,（7）
• 页码范围: 963-972
• 页数: 10页
• 语种: 英文

摘要

This study presents the fabrication of 14Cr Fe-Cr-A1 oxide dispersion strengthened (ODS) alloy by a direct oxidation pro-cess.In order to explain how oxide nanoparticles are formed in the consolidation process,the powders after oxidation are subjected to vacuum thermal treatment at high temperatures.Differential scanning calorimeter,X-ray photoelectron spec-troscopy,scanning electron microscopy and transmission electron microscopy techniques are used to detect the generation,evolution of oxides on both the surface and interior of the powder,as well as the type of oxide nanoparticles in the fabricated ODS alloy.It is found that an iron oxide layer is formed on the surface of the powder during low temperature oxidation.And the iron oxide layer would be decomposed after thermal treatment at high temperature.In the consolidation process,the oxygen required by the reaction of alumina and yttrium oxide to produce nanoscale Y-Al-O particles mainly derives from the decomposition of iron oxide layer at elevated temperature and the inward diffusion of oxygen.Using the direct oxidation process,YAlO3 nanoparticles are dispersed in the grains and at the grain boundaries of Fe-Cr-Al ODS alloy.