Mechanical and Physical Properties of Pineapple Leaf and Sun Hemp Fibre Reinforced Hybrid Natural Composite Fabricated by Compression Moulding Method

• 作者: A.Arun Premnath
• 来源期刊: 仿生工程学报（英文版）
• 年，卷（期）: 2022,（1）
• 所属期刊栏目: RESEARCH ARTICLES
• 页码范围: 257-267
• 页数: 11页
• 语种: 英文

摘要

The implementation of natural fibres in polymer composites will result in biodegradable,low cost,recyclable materials for automobile and structural applications.In the process of making natural fibre composites viable in the global market,it is essential to understand its mechanical and physical properties.In the present investigation,mechanical and physical proper-ties of pineapple Leaf(PALF)and Sun Hemp(SH)Fibre reinforced with epoxy matrix was studied in terms of weight(wt)％of fibre loading and chemical treatment.The composites were fabricated by compression moulding technique with PALF fibre content varying from 10,15 and 20％of weight fraction.The PALF and SHF were treated with NaOH solution for 1 h at room temperature.The various mechanical properties such as tensile,compression,flexural and impact strength were measured as per ASTM standard.The density and water absorption were also measured to study the physical properties of the fabricated composites.The treated composites exhibit a rough surface because of the removal of the cellulose layer which results in better adhesion between the matrix/fibre interface than untreated composites.The NaOH treated fibres composites outperformed untreated fibre composites in terms of mechanical and physical properties except for impact strength.The morphological studies of the worn surfaces are examined using Scanning Electron Microscope(SEM).