Magnetization study of ITER-type internal-Sn Nb3Sn superconducting wire

• 来源期刊: 中国物理（英文版）
• 关键词: NbsSn superconducting wire internal-Sn process irreversibility temperature,hysteresis width
• 年，卷（期）: 2007,（6）
• 页码范围: 1764-1769
• 页数: 6页
• 语种: 英文

摘要

Through magnetization measurement with a SQUID magnetometer the heat treatment optimization of an international thermonuclear experimental reactor (ITER)-type internal-Sn Nb3Sn superconducting wire has been investigated. The irreversibility temperature T*(H), which is mainly dependent on A15 phase composition, was obtained by a warming and cooling cycle at a fixed field. The hysteresis width △M(H) which reflects the flux pinning situation of the A15 phase is determined by the sweeping of magnetic field at a constant temperature. The results obtained from differently heat-treated samples show that the combination of T*(H) with △M(H) measurement is very effective for optimizing the heat reaction process. The heat treatment condition of the ITER-type wire is optimized at 675 ℃/128 h, which results in a composition closer to stoichiometric Nb3Sn and a state with best flux pinning.