Microstructure, Adhesion and Wear of Plasma Sprayed AlSi-SiC Composite Coatings

• 作者: P. R. Soni R. M. Mohanty Satish Tailor V. K. Sharma
• 来源期刊: 表面工程材料与先进技术期刊(英文)
• 学科: 工学
• 关键词: AlSi-SiC Attrition MILLING Plasma Spray Coating ADHESION Strength WEAR Resistance
• 年，卷（期）: 2012,（3）
• 页码范围: 227-232
• 页数: 6页
• 分类号: TG17

摘要

Al-12.5 wt% Si alloy powder with 15 wt% SiCp was mechanically alloyed (MA) using attrition mill in purified nitrogen atmosphere. The MA processed powder was found to have nano grain size and uniform distribution of SiCp in the AlSi matrix. This MA processed powder was used for atmospheric plasma spraying (APS) for varying distances and currents densities. The coatings obtained were studied by image analyzer, SEM and XRD. Microhardness and wear rate of the coatings were evaluated using Vickers indenter and pin on disk type tribometer, respectively. Adhesion strength of the coatings was measured by interfacial indentation test. The results showed that these coatings have uniform distribution of reinforced SiC particles in the nano crystalline matrix, low porosity (1% - 2%), low wear rates and improved adhe-sion strength. It was also observed that by increasing current density of APS, the adhesive strength increased.