Shake table tests of different seismic isolation systems on a large scale structure subjected to low to moderate earthquakes

• 来源期刊: 交通运输工程学报（英文版）
• 关键词: Shake table test Seismic isolation Lead rubber bearing (LRB) Ball rubber bearing (BRB) Elastomeric bearing
• 年，卷（期）: 2018,（6）
• 页码范围: 480-490
• 页数: 11页
• 语种: 英文

摘要

Seismic isolation systems designed for extreme events may likely experience low to moderate earthquakes during the design life of the structure rather than the extreme event itself.In new seismic building design codes,low and moderate earthquakes are also mandatory to be investigated in Turkey and some other countries.One of the main reasons is to protect the integrity of non-structural elements or machines during these types of earthquakes.The selection of appropriate seismic isolation is typically decided based on their forcedisplacement characteristics and amount of energy dissipation per cycle.The same energy dissipation per cycle (EDC) can be achieved by high force-low displacement or low force-high displacement response.The focus of this research is given to identify the performance of ball rubber bearing isolation systems compared to different or similar EDC units such as elastomeric bearings and lead rubber bearings through a series of shake table tests performed at low to moderate earthquake levels.Shake table tests were conducted on an almost full scale short span bridge.The tests have revealed that the ball rubber bearings are superior to elastomeric bearings in terms of EDC and can match EDC of LRB.However,although LRB and BRB have the same EDC,BRB is more beneficial to use under low to moderate earthquakes since BRB can transmit less force with larger displacement compared to LRB and LRB can sometimes stay in elastic range with an ineffective EDC as a stiffer elastomeric bearing.