This article reports results of a survey of railroad tie management conducted by the Association of American Railroads (AAR) reflecting 2017 practices. Similar surveys were previously conducted for 2013 and 2008 practices. North American railroads purchase approximately 23 million new wood crossties annually. Most ties are used to replace worn ties. Through this survey, the AAR seeks to provide clarity to its member railroads, the regulators, and other interested parties, regarding how the railroads’ tie purchase preferences and used tie management choices have been changing in response to changing technologies and regulations. Technology changes include use of borate preservatives to dual-treat wood ties to provide longer service life in high decay environments, non-wood ties made of concrete or plastic, and energy conversion methods for used ties such as gasification and torrefaction. Passage of the EPA Non-Hazardous Secondary Materials (NHSM) rule in 2011, including updates in 2013, 2016, and 2018, is reducing the potential for recycling used ties as fuel. However, the EPA is also promoting use of biological materials, such as wood, to produce energy without increasing carbon dioxide (CO2) levels in the atmosphere, thus reducing human caused climate change. Purchase and tie management trends are indicated by the survey results. Approximately 95% of all ties purchased are preservative-treated wood. Due to demonstrated longer service life in high decay zones for wood ties that are dual treated with borate and either creosote or copper naphthenate, the fraction of concrete and plastic tie purchases has decreased while the faction of dual treated wood tie purchases has increased. Recycling used ties for energy remains the most common practice, at 66% of ties, but has declined from 81% in 2013. Reuse of ties for other treated wood uses, such as landscape and agricultural type purposes, remains common at approximately 18%. Landfill disposal remains uncommon, but seems to be increasing at 6% of removed ties. The sh