3D Model Simulating the Hydro-mechanical State of Unsaturated and Deformable Material during Hot air Drying

• 作者: Lamine Hassini Sadoth Sandoval Torres
• 来源期刊: 水利科学与海洋工程(英文)
• 学科: 工学
• 关键词: Modeling and simulation Cellulosic-clay composite Convective drying Von Mises stress Material failure
• 年，卷（期）: 2020,（1）
• 页码范围: 27-32
• 页数: 6页
• 分类号: TG1

摘要

A three dimensional model to predict the hydro-mechanical state of unsaturated and deformable material during hot air drying has been proposed.The material viscoelastic behaviour was formulated using Bishop’s effective stress theory for partially saturated material using the liquid saturation as the Bishop parameter.The hydro-thermal and mechanical equations were coupled by the fluid pressure and the solid matter velocity.The model was applied to a deformable material(innovative clay-cellulose fibers composite)subjected to convective drying.A generalized Maxwell model with five elements,whose parameters were measured experimentally and correlated to water content was used to describe the material’s viscoelastic behavior.The hydro-thermal part of the proposed model was validated on the basis of a comparison of experimental and simulated drying rate curves.The Von Mises stress was simulated and compared to the experimental tensile strength in order to predict the time and the region of material failure.For a drying process at 95°C,the region of failure risk was identified.The failure may occur on the lateral surface of the slab in contact with air at a drying time of 2.5h.