Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg-Zn-Ca-Mn Magnesium Alloy

• 作者: Jun-Gang Han Kai-Bo Nie Kun-Kun Deng Paul Munroe Zhi-Hao Zhu
• 来源期刊: 金属学报（英文版）
• 年，卷（期）: 2020,（7）
• 页码范围: 922-936
• 页数: 15页
• 语种: 英文

摘要

A new Mg-2.2 wt％ Zn alloy containing 1.8 wt％ Ca and 0.5 wt％ Mn has been developed and subjected to extrusion under different extrusion parameters.The finest (～ 0.48 μm) recrystallized grain structures,containing both nano-sized MgZn2 precipitates and αt-Mn nanoparticles,were obtained in the alloy extruded at 270 ℃/0.01 mm s-1.In this alloy,the deformed coarse-grain region possessed a much stronger texture intensity (～ 32.49 mud) relative to the recrystallized fine-grain region (～ 13.99 mud).A positive work hardening rate in the third stage of work hardening curve was also evident in the alloy extruded at 270 ℃,which was related to the sharp basal texture and which provided insufficient active slip systems.The high work hardening rate in the fourth stage contributed to the high ductility extruded at 270 ℃/1 mm s-1.This alloy exhibited a weak texture,and the examination of fracture surface revealed highly dimpled surfaces.The optimum tensile strength was achieved in the alloy extruded at 270 ℃/0.01 mm s-1,and the yield strength,ultimate tensile strength and elongation to failure were ～ 364.1 MPa,～ 394.5 MPa and～ 7.2％,respectively.Fine grain strengthening from the recrystallized fine-grain region played the greatest role in the strength increment of this alloy compared with Orowan strengthening and dislocation strengthening in the deformed coarse-grain regions.

作者信息

序号	姓名	单位	发文数	被引次数	H指数	G指数
1	Kai-Bo Nie		1	0	0.0	0.0
2	Zhi-Hao Zhu		1	0	0.0	0.0
3	Paul Munroe		1	0	0.0	0.0
4	Kun-Kun Deng		1	0	0.0	0.0
5	Jun-Gang Han		1	0	0.0	0.0