Application of microbially induced carbonate precipitation to form bio-cemented artificial sandstone

• 作者: Charalampos Konstantinou Giovanna Biscontin Ning-Jun Jiang Kenichi Soga
• 来源期刊: 岩石力学与岩土工程学报（英文版）
• 年，卷（期）: 2021,（3）
• 页码范围: 579-592
• 页数: 14页
• 语种: 英文

摘要

It is difficult to collect and characterise well-preserved samples of weakly-cemented granular rocks as conventional sampling techniques often result in destruction of the cementation. An alternative approach is to prepare synthetic geomaterials to match required specifications. This paper introduces microbially induced carbonate precipitation (MICP) as a method to reliably deliver artificially cemented specimens with customised properties, closely resembling those of soft carbonate sandstones. The specimens are generated from materials with two highly different particle size distributions (PSDs) to access a range of achievable combinations of strengths and porosities. The MICP parameters are kept constant across all samples to obtain similar calcium carbonate characteristics (size of individual crystals, type, etc.), while injected volume is varied to achieve different cementation levels. Although uniform cementation of very coarse sands has been considered very difficult to achieve, the results show that both the fine and coarse sand specimens present high degrees of uniformity and a good degree of repeatability. The unconfined compressive strengths (UCSs) (less than 3000 kPa) and porosities (0.25-0.4) of the artificial specimens fall in the same range of values reported for natural rocks. The strength gain was greater in the fine sand than that in the coarse sand, as the void size in the latter was significantly larger compared to the calcium car-bonate crystals' size, resulting in precipitation on less effective locations, away from contacts between particles. The strengths and porosities obtained for the two sands in this work fall within ranges reported in the literature for natural soft rocks, demonstrating the MICP technique is able to achieve realistic properties and may be used to produce a full range of properties by varying the grain sizes, and possibly the width of PSD.