Enhanced Mechanical Properties of Friction Stir Welded 5083Al-H19 Joints with Additional Water Cooling

• 来源期刊: 材料科学技术（英文版）
• 年，卷（期）: 2017,（9）
• 页码范围: 1009-1014
• 页数: 6页
• 语种: 英文

摘要

3-mm-thick 5083Al-H19 rolled plates were friction stir welded (FSW) at tool rotation rates of 800 and 200rpm with and without additional water cooling.With decreasing the rotation rate and applying water cooling,softening in the FSWjoint was significantly reduced.At a low rotation rate of 200 rpm with additional water cooling,almost no obvious softening was observed in the FSW joint,and therefore a FSW 5083Al-H19 joint with nearly equal strength to the base material (BM) was obtained.Furthermore,the grains in the nugget zone were considerably refined with reducing the heat input and ultrafine equiaxed grains of about 800 nm were obtained in the lowest heat input condition.This work provides an effective method to achieve high property FSW joints of precipitate-hardened and work-hardened Al alloys.